A Complete
How To Guide To Woodworking, Woodcarving And Woodturning
These guides can teach you the basics of carpentry and woodworking.
These CD's
 cover everything for the beginner to the advanced craftsman.
Learn
everything you need to know from basic tools, shop layout, woodworking joints,
If you are
looking for some great lessons, tips and plans; these are very informative and
instructive books.
There are 6
complete books in total on this CD!
All
yours for only $9.95. Titles included are...
|
Book 1...A
Complete Guide to Woodworking Joints |
 |
From the Forward..."To
be successful in woodworking the possession of two secrets is essential—to know
the right joint to use, and to know how to make that joint in the right way."
This guide has fifteen
chapters and over 400 illustrations and photos on the proper joints used in
woodworking projects.
Includes chapters on the mortise & tenon, dovetails, tongue &
groove and much more.
|
Some of the over 400 illustrations include...
136 Pages, on CD, on Subjects Such As:
|
The Glued Joint |
|
The Halved Joint |
|
The Bridle Joint |
|
The Tongued and Grooved Joint |
|
The Mortise and Tenon Joint |
|
The Dowelling Joint |
|
The Scarf Joint |
|
The Hinged Joint |
|
Shutting Joints |
|
The Dovetail Joint |
|
Dovetail Grooving |
|
The Mitered Joint |
|
Joints for Curved Work |
|
Miscellaneous Joints |
|
Puzzle Joints |
|
Book 2...A
Complete Guide to Woodturning - How to Use the Lathe |
 |
If you are looking to learn to
turn wood, want some advanced exercises or want some excellent plans...this book
is for you!
This guide has eleven
chapters and over 170 illustrations and photos on the proper use of tools and
exercises used in
woodturning.
Includes chapters on turning duplicates, turning tools,
spindle & face plate turning, many plans, care and use of the lathe and much more.
The ultimate aim of this book is
to give, through the exercises and problems, a thorough understanding of the
principles of wood turning by gradually developing the confidence of the pupil
in the complete control of his tools, at the same time suggesting harmonious
lines in design which will lead to other ideas in designing problems.
|
Some of the over 170 illustrations include...
119 Pages, on CD, on Subjects Such As:
|
CHAPTER I
Introductory
--Commercial and Educational Values of Wood Turning
--Elements of Success
|
|
CHAPTER II
The Lathe
--Care of the Lathe
--Speed of the Lathe
--Method of Figuring the Diameter of Pulleys
--Rules for Finding the Speeds and Sizes of Pulleys
--Points on Setting Up the Lathe and Shafting
|
|
CHAPTER III
Wood Turning Tools
--Grinding and Whetting Turning Tools
--The Gouge
--The Parting Tool
--Scraping Tools
|
|
CHAPTER IV
Spindle Turning
--Centering Stock
--Clamping Stock in the Lathe
--Adjusting the Tool Rest
--Position of the Operator at the Lathe
--Holding the Tools
--Use of the Tools in Spindle Turning
|
|
CHAPTER V
Tool Processes in Spindle Turning
--The Roughing Cut
--The Sizing Cut
--The Smoothing Cut
--Testing for Smoothness
--Measuring for Length
--Squaring Ends
--Cutting Off
--Shoulder Cuts
--Taper Cuts
--V Cuts-Concave Cuts
--Convex Cuts
--Combination Cuts
--Chisel Handles
--Mallets and Handles
--Vise Handles
--Squaring
Ends
--Cutting Off
--Shoulder Cuts
--Taper Cuts
--V Cuts-Concave Cuts
--Convex Cuts
--Combination Cuts
--Chisel Handles
--Mallets and Handles
--Vise Handles |
|
|
CHAPTER VI
Oval Turning
--Tool Operations
|
|
CHAPTER VII
Duplicate Turning
--Use of Measuring Stick
--Use of Templates
|
|
CHAPTER VIII
Finishing and Polishing
--Ordinary Cabinet Finishing
--French Polishing
--Method of Applying French Polish
|
|
CHAPTER IX
Face-Plate and Chuck Turning
--Methods of Fastening Stock
--Small Single Screw Face-Plate
--Large Surface Screw Face-Plate
--Gluing to Waste Stock
--Lathe Adjustments
--Position of Tool Rest
|
|
CHAPTER X
Tool Processes in Face-Plate and Chuck Turning
--Straight Cuts
--Roughing Off Corners
--Callipering for Diameter
--Smoothing Cut
--Roughing Cut on the Face
--Smoothing the Face
--Laying Off Measurements
--External Shoulders
--Internal Shoulders
--Taper Cuts
--V Cuts
--Concave Cuts
--Convex Cuts
--Combination Cuts
--Use of Scraping Tools
--Internal Boring
--Turning a Sphere
|
|
CHAPTER XI
Spiral Turning
--Single Spiral, Straight Shaft
--Tapered Shaft
--Double Spiral, Tapered Shaft
--Double Spiral, Straight Shaft
--Double Groove Spiral, Straight Shaft
|
|
|
Book 3...Carpentry For
Boys and Beginners |
 |
Learn the basics of
carpentry.
This guide has twenty-one
chapters and 250 illustrations on learning in simple language.
Includes chapters on drawing,
laying out your work, designing and architecture.
|
Some of the 250 illustrations include...
169 Pages, on CD, on Subjects Such As:
|
I. Tools and
Their Uses |
|
Knowledge of Tools. A Full Kit of Tools. The Hatchet. The Claw
Hammer. About Saws—Cross-cut, Rip Saw, Back Saw. Planes—Jack Plane,
Smoothing Plane, Pore Plane. Gages. Chisels—Firmer Chisel. Trusses.
Saw Clamps. The Grindstone. Oilstone. Miter Box. The Work Bench. |
|
II. How to Grind and
Sharpen Tools |
|
Care of
Tools—-First Requisites. Saws—How to Set. Saw-set Errors. Saw Setting
Block. Filing. The Angle of Filing. Filing Pitch. Saw Clamps. Filing
Suggestions. The File. Using the File. The Grindstone. In the Use of
Grindstones. Correct Way of Holding Tool in Grinding. Care of Stone.
Incorrect Way to Hold Tool. Way to Revolve or Turn Grindstone. The
Plane. The Gage. Chisels. General Observations. |
|
III. How to Hold and
Handle Tools |
|
On the
Holding of Tools. The Saw. How to Start a Saw. Sawing on a Line. The
First Stroke. The Starting Cut for Cross-cutting. Forcing a Saw. The
Stroke. The Chinese Saw. Things to Avoid. The Plane. Angle for Holding
Planes. Errors to be Avoided. The Gage. Holding the Gage. The
Draw-knife. |
|
IV. How to Design
Articles |
|
Fundamentals of Designing. The Commercial Instinct. First Requirements
of Designing. Conventional Styles. The Mission Style. Cabinets. Harmony
of Parts. Harmony of Wood. |
|
V. How work is Laid
Out |
|
Concrete
Examples of Work. Dimensions. Laying Out a Table. The Top. The Mortises.
The Facing Boards. The Tenons. Tools Used. Chamfered Tenons. The Frame.
The Drawer Support. The Table Frame. The Top. The Drawer. How Any
Structure is Built Up. Observations About Making a Box. Points. Beveling
and Mitering. Proper Terms. Picture Frames. Dovetail Points. Box Points.
First Steps in Dovetailing. Cutting Out the Spaces. Tools Used in Laying
Out Mortises and Tenons. |
|
VI. The Uses of the
Compass and the Square
The Compass. Determining Angles. Definition of Degrees.
Degrees Without a Compass. How Degrees are Calculated by the Dividers.
|
|
VII. How the
Different Structural Parts are Designated |
|
Importance of Proper Designation. How to Explain Mechanical Forms.
Defining Segment and Sector. Arcade, Arch, Buttress, Flying Buttress,
Chamfer, Cotter, Crenellated, Crosses, Curb Roof, Cupola, Crown Post,
Corbels, Dormer, Dowel, Drip, Detent, Extrados, Engrailed, Facet, Fret,
Fretwork, Frontal, Frustums, Fylfot, Gambrel Roof, Gargoyle, Gudgeon,
Guilloche. Half Timbered, Hammer Beam, Header, Hip Roof, Hood Molding,
Enclave, Interlacing Arch, Inverted, Inverted Arch, Key Stone, King
Post, Label, Louver, Lintel, Lug, M-Roof, Mansard Roof, Newel,
Parquetry, Peen, Pendant, Pedestal, Pedestal, Plinth, Portico, Plate,
Queen Post, Quirk Molding, Re-entering Angle, Rafter, Scarfing, Scotia
Molding, Sill, Skewback, Spandrel, Strut, Stud, Stile, Tie Beam, Timber,
Trammel, Turret, Transom, Valley Roof. |
|
VII. How the
Different Structural Parts are Designated |
|
Importance of Proper Designation. How to Explain Mechanical
Forms. Defining Segment and Sector. Arcade, Arch, Buttress,
Flying Buttress, Chamfer, Cotter, Crenellated, Crosses, Curb
Roof, Cupola, Crown Post, Corbels, Dormer, Dowel, Drip, Detent,
Extrados, Engrailed, Facet, Fret, Fretwork, Frontal, Frustums,
Fylfot, Gambrel Roof, Gargoyle, Gudgeon, Guilloche. Half
Timbered, Hammer Beam, Header, Hip Roof, Hood Molding, Enclave,
Interlacing Arch, Inverted, Inverted Arch, Key Stone, King Post,
Label, Louver, Lintel, Lug, M-Roof, Mansard Roof, Newel,
Parquetry, Peen, Pendant, Pedestal, Pedestal, Plinth, Portico,
Plate, Queen Post, Quirk Molding, Re-entering Angle, Rafter,
Scarfing, Scotia Molding, Sill, Skewback, Spandrel, Strut, Stud,
Stile, Tie Beam, Timber, Trammel, Turret, Transom, Valley Roof. |
|
VIII.
Drawing and Its Utility |
|
Fundamentals in Drawing. Representing Objects. Forming Lines and
Shadows. Analysis of Lines and Shadings. How to Show Plain
Surfaces. Concave Surfaces. Convex Surfaces. Shadows from a
Beam. Flat Effects. The Direction of Light. Raised Surfaces.
Depressed Surfaces. Full Shading. Illustrating Cube Shading.
Shading Effect. Heavy Lines. Perspectives. True Perspective of a
Cube. Isometric Cube. Flattened Perspective. Technical
Designations. Sector and Segment. Terms of Angles. Circles and
Curves. Irregular Curves. Ellipses and Ovals. Focal Points.
Produced Line. Spirals, Perpendicular and Vertical. Signs to
Indicate Measurement. Definitions. Abscissa. Angle. Apothegm.
Apsides or Apsis. Chord. Cycloid. Conoid. Conic Section.
Ellipsoid. Epicycloids. Evolutes. Flying Buttress. Focus.
Gnomes. Hexagon. Hyperbola. Hypotenuse. Incidental. Isosceles.
Triangle. Parabola. Parallelogram. Pelecoid. Polygons. Pyramid.
Rhomb. Sector. Segment. Sinusoid. Tangent. Tetrahedron. Vertex. |
|
|
|
IX. Moldings, with
Practical Illustrations in Embellishing Work |
|
Moldings.
The Basis of Moldings. The Simplest Moldings. The Astragal. The Cavetto.
The Ovolo. The Torus. The Apothegm. The Cymatium. The Ogee. Ogee Recta.
Ogee Reversal. The Reedy. The Casement. The Roman-Doric Column. Lesson
from the Doric Column. Applying Molding. Base. Embellishments.
Straight-faced Molding. Plain Molding. Base. Diversified Uses. Shadows
Cast by Moldings. |
|
X. An Analysis of
Tenoning, Mortising, Rabbeting and Beading |
|
Where
Mortises Should be Used. Depth of Mortises. Rule for Mortises. True
Mortise Work. Steps in Cutting Mortises. Things to Avoid in Mortising.
Lap-and-Butt Joints. Scarfing. The Tongue and Groove. Beading.
Ornamental Bead Finish. The Bead and Rabbet. Shading with Beads and
Rabbets. |
|
XI. House Building |
|
House
Building. The Home and Embellishments. Beauty Not Ornamentation. Plain
Structures. Colonial Type. The Roof the Keynote. Bungalow Types. General
House Building. Building Plans. The Plain Square-Floor Plan. The
Rectangular Plan. Room Measurements. Front and Side Lines. The Roof.
Roof Pitch. The Foundation. The Sills. The Flooring Joist. The Studding.
Setting Up. The Plate. Intermediate Studding. Wall Headers. Ceiling
Joist. Braces. The Rafters. The Gutter. Setting Door and Window Frames.
Plastering and Finish Work. |
|
XII. Bridges,
Trussed Work and Like Structures |
|
Bridges.
Self-supporting Roofs. Common Trusses. The Vertical Upright Truss. The
Warren Girder. The Bowstring Girder. Fundamental Truss Forms. |
|
XIII. The Best Woods
for the Beginner |
|
The Best
Woods. Soft Woods. Hard Woods. The Most Difficult Woods. The Hard-ribbed
Grain in Wood. The Easiest Working Woods. Differences in the Working of
Woods. Forcing Saws in Wood. |
|
XIV. Wood Turning |
|
Advantages of Wood Turning. Simple Turning Lathe. The Rails. The Legs.
Centering Blocks. The Tail-stock. The Tool Rest. Materials. The Mandrel.
Fly-wheel. The Tools Required. |
|
XV. On the Use of
Stains |
|
Soft
Wood. Use of Stains. Stains as Imitations. Good Taste in Staining. Great
Contrasts Bad. Staining Contrasting Woods. Hard Wood Imitations. Natural
Effects. Natural Wood Stains. Polishing Stained Surfaces. |
|
XVI. The Carpenter
and the Architect
|
|
XVII. Useful
Articles to Make |
|
Common
Bench. It’s Proportions. Square Top Stool. Folding Blacking Box.
Convenient Easel. Hanging Book-rack. Sad Iron Holder. Bookcase.
Wood-box. Parallel Bars for Boys' Use. Mission Writing Desk. Screen
Frame. Mission Chair. Grandfather's Clock. Knockdown and Adjustable
Bookcase. Coal Scuttle Frame or Case. Mission Arm Chair. Dog-house.
Settle, With Convenient Shelves. Towel Rack. Sofa Framework. |
|
XVIII. Special Tools
and Their Uses |
|
Bit and
Level Adjuster. Miter Boxes. Swivel Arm Uprights. Movable Stops. Angle
Dividers. "Odd Job" Tool. Bit Braces. Ratchet Mechanism. Interlocking
Jaws. Steel Frame Breast Drills. Horizontal Boring. -Jaw Chuck. Planes.
Rabbeting, Beading and Matching. Cutter Adjustment. Depth Gage. Slitting
Gage. Dovetail Tongue and Groove Plane. Router Planes. Bottom Surfacing.
Door Trim Plane. |
|
XIX. Roofing Trusses |
|
Characteristics of Trusses. Tie Beams. Ornamentation. Objects of Beams,
Struts and Braces. Utilizing Space. Types of Structures. Gambrel Roof.
Purling Roof. The Princess Truss. Arched, or Cambered, Tie Beam Truss.
The Mansard. Scissors Beam. Braced Collar Beam. Rib and Collar Truss.
Hammer-beam Truss. Flying Buttress. |
|
XX. On the
Construction of Joints |
|
Definition and Uses. Different Types. Bridle Joint. Spur Tenon. Saddle
Joints. Joggle Joint. Heel Joints. Stub Tenon. Tusk Tenon. Double Tusk
Tenon. Cogged Joints. Anchor Joints. Deep Anchor Joints. |
|
XXI. Some Mistakes
and a Little Advice in Carpentry |
|
Lessons
From Mistakes. Planing the Edge of a Board Straight. Planing it Square.
Planing to Dimensions. Holding the Plane. How it Should be Run on the
Edge of the Board. Truing With the Weight of the Plane. A Steady Grasp.
In Smoothing Boards. Correct Sand-papering. Gluing. Removing Surplus
Glue. Work Edge and Work Side. The Scribing and Marking Line. Finishing
Surfaces. Sawing a Board Square. The Stroke of the Saw. Sawing Out of
True. |
|
|
Book 4...A
Complete Guide to Woodcarving - How to Carve Wood |
 |
Learn to carve wood with this
guide that covers everything from basic tools to advanced carving techniques.
This guide has twenty-seven
chapters and numerous illustrations and photos on the proper tools, woods and
more about
woodcarving projects.
Includes chapters on the tools required, keeping the tools
sharp, types of wood used in carving, examples of advanced items, patterning,
carving furniture and much more.
|
Some of the 90 illustrations include...
126 Pages, on CD, on Subjects Such As:
PREAMBLE
CHAPTER I |
|
Student and Apprentice, their Aims and Conditions of Work—Necessity
for Some Equality between Theory and Practice—The Student's
Opportunity lies on the Side of Design |
|
CHAPTER II |
TOOLS
|
|
Average Number of Tools required by Carvers—Selection for
Beginners—Description of Tools—Position when in Use—Acquisition by
Degrees |
|
CHAPTER III |
SHARPENING-STONES—MALLET AND BENCH
|
|
Different Stones in Use—Case for Stones—Slips—Round Mallet Best—A
Home-Made Bench—A Makeshift Bench—Cramps and Clips |
|
CHAPTER IV |
WOODS USED FOR CARVING
|
|
Hard Wood and Soft Wood—Closeness of Grain Desirable—Advantages of
Pine and English Oak |
|
CHAPTER V |
SHARPENING THE TOOLS
|
|
The Proper Bevel—Position of Tools on Oilstone—Good and Bad
Edge—Stropping—Paste and Leather—Careless Sharpening—Rubbing Out the
Inside—Stropping Fine Tools—Importance of Sharp Tools |
|
CHAPTER VI |
"CHIP" CARVING
|
|
Its Savage Origin—A Clue to its only Claim to Artistic
Importance—Monotony better than Variety—An Exercise in Patience and
Precision—Technical Methods |
|
CHAPTER VII |
THE GRAIN OF THE WOOD
|
|
Obstinacy of the Woody Fiber—First Exercise in Grounding—Description
of Method—Cutting the Miters—Handling of Tools, Danger of
Carelessness—Importance of Clean Cutting |
|
CHAPTER VIII |
IMITATION OF NATURAL FORMS
|
|
Difficulties of Selection and Arrangement—Limits of an Imitative
Treatment—Light and Distance Factors in the Arrangement of a
Design—Economy of Detail Necessary—The Word "Conventional" |
|
CHAPTER IX |
ROUNDED FORMS
|
|
Necessity for every Carver Making his own Designs—Method of Carving
Rounded Forms on a Sunk Ground |
|
CHAPTER X |
THE PATTERNED BACKGROUND
|
|
Importance of Formal Pattern as an Aid to Visibility—Pattern and
Free Rendering Compared—First Impressions Lasting—Medieval Choice of
Natural Forms Governed by a Question of Pattern |
|
CHAPTER XI |
CONTOURS OF SURFACE
|
|
Adaptation of Old Designs to Modern Purposes—"Throwing
About"—Critical Inspection of Work from a Distance as it Proceeds |
|
CHAPTER XII |
ORIGINALITY
|
|
Dangers of Imposing Words—Novelty more Common than Originality—An
Unwholesome Kind of "Originality" |
|
CHAPTER XIII |
PIERCED PATTERNS
|
|
CHAPTER XIV |
HARDWOOD CARVING
|
|
Carvings can not be Independent Ornaments—Carving Impossible on
Commercial Productions—The Amateur Joiner—Corner
Cupboards—Introduction of Foliage Definite in Form, and Simple in
Character—Methods of Carving Grapes |
|
Exercise in Background Pattern—Care as to Stability—Drilling and
Sawing out the Spaces—Some Uses for Pierced Patterns |
|
|
CHAPTER XV |
THE SKETCH-BOOK
|
|
Old Work Best Seen in its Original Place—Museums to be
approached with Caution.—Methodical Memoranda—Some
Examples—Assimilation of Ideas Better than Making Exact
Copies |
|
CHAPTER XVI |
MUSEUMS
|
|
False Impressions Fostered by Fragmentary
Exhibits—Environment as Important as Handicraft—Works Viewed
as Records of Character—Carvers the Historians of their Time |
|
CHAPTER XVII |
STUDIES FROM NATURE—FOLIAGE
|
|
Medieval and Modern Choice of Form Compared—A Compromise
Adopted—A List of Plant Forms of Adaptable Character |
|
CHAPTER XVIII |
CARVING ON FURNITURE
|
|
Furniture Constructed with a View to Carving—Reciprocal Aims
of Joiner and Carver—Smoothness Desirable where Carving is
Handled—The Introduction of Animals or Figures |
|
CHAPTER XIX |
THE GROTESQUE IN CARVING
|
|
Disproportion Not Essential to the Expression of Humor—The
Sham Grotesque Contemptible—A True Sense of Humor Helpful to
the Carver |
|
CHAPTER XX |
STUDIES FROM NATURE—BIRDS AND BEASTS
|
|
The Introduction of Animal Forms—Rude Vitality better than
Dull "Natural History"—"Action"—Difficulties of the Study
for Town-Bred Students—The Aid of Books and
Photographs—Outline Drawing and Suggestion of Main
Masses—Sketch-Book Studies, Sections, and Notes—Swiss Animal
Carving—The Clay Model: its Use and Abuse
|
|
CHAPTER XXI |
FORESHORTENING AS APPLIED TO WORK IN RELIEF
|
|
Intelligible Background Outline Better than Confused
Foreshortening—Superposition of Masses |
|
CHAPTER XXII |
UNDERCUTTING AND "BUILT-UP" WORK
|
|
Undercutting as a Means and as an End; its Use and
Abuse—"Built-up" Work—"Planted" Work—"Pierced" Work |
|
CHAPTER XXIII |
PICTURE SUBJECTS AND PERSPECTIVE
|
|
The Limitations of an Art not Safely Transgressed—Aerial
Perspective Impossible in Relief—Linear Perspective only
Possible in a Limited Way |
|
CHAPTER XXIV |
ARCHITECTURAL CARVING
|
|
The Necessity for Variety in Study—A Carver's View of the
Study of Architecture; Inseparable from a Study of his own
Craft—Importance of the Carpenter's Stimulating Influence
upon the Carver—Carpenters' Imitation of Stone Construction
Carried too Far |
|
CHAPTER XXV |
SURFACE FINISH—TEXTURE
|
|
Tool Marks, the Importance of their Direction—The Woody
Texture Dependent upon Clearness of Cutting and Sympathetic
Handling |
|
CHAPTER XXVI |
CRAFT SCHOOLS, PAST AND PRESENT
|
|
The Country Craftsman of Old Times—A Colony of Craftsmen in
Busy Intercourse—The Modern Craftsman's Difficulties:
Embarrassing Variety of Choice |
|
CHAPTER XXVII |
ON THE IMPORTANCE OF COOPERATION BETWEEN BUILDER AND CARVER
|
|
The Infinite Multiplicity of Styles—The "Gothic" Influence:
Sculpture an Integral Element in its Designs—The Approach of
the so-called "Renaissance" Period—Disturbed Convictions—The
Revival of the Classical Style—The Two Styles in Conflict
for a Time; their Respective Characteristics
Reviewed—Carvers Become Dependent upon Architects and
Painters—The "Revival" Separates "Designer" and "Executants" |
|
Notes on the Collotype Plates |
|
The Collotype Plates |
|
|
|
|
|
|
Book 5...A
Complete Guide to Woodworking - A How to Woodwork Guide |
|
|
If you are a complete beginner
in woodworking or a master craftsman, this book has something for everyone.
This book covers it all; start with selecting and seasoning your lumber all the
way to the final finishing.
This guide has ten
chapters and 157 illustrations and photos on the basics and beginnings of
woodworking.
Includes chapters on the seasoning of wood, how to properly
use tools, types of fasteners, how to measure & mark and much more.
|
Some of the 157 illustrations include...
208 Pages, on CD, on Subjects Such As:
|
Seasoning
Wood
Woodworking
Hand Tools
Wood
Fastenings
-
Nails
-
Screws
-
Bolts
-
Glue
-
Hinges
-
Locks
Care of the
Woodworking Shop
Common Joints
Types of
Wooden Structures
Principles of
Wooden Joinery
Wood
Finishing |
Book 6...A
Complete Guide to Wood Finishing |
 |
Wood finishing can be tricky.
After spending hours on a woodworking project you definitely want the finish to
look great.
This guide will show you how to get beautiful results from
your finish not matter what the project may be; even if you have never finished
a piece before.
Learn every step in the finishing process from start to
finish and much more.
|
141 Pages, on CD, on Subjects Such As:
|
Wood Finishing in General
Preparation of New and Old Surfaces
Stains in General
Factory
Prepared Stains
Water Stains
Stain Brushing and Procedure
Preparing Wood to Take Stain Evenly
The Mixing and Use of Wood Fillers
Varnish and Shellac
Varnishing, Rubbing and Polishing
Varnish
Defects and Their Causes
Lacquers
Wax Finishes and
Oil-Rubbed Finishes
Schedules of Working
Operations
Wood & Descriptions of
Characteristics
Brush Graining
Decorative Wood Finishes
by Glazing and Highlighting
Repairing Damaged Finishes
| |
